Product ID:ARCHITECTURAL LATEX BLOCK FILLER - WHITE
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000375
MSDS Number: BBGMF

MOBILE PAINT MFG. CO., INC.

Emergency Phone: 205/653-0110

Cage: 88633

MOBILE PAINT MANUFACTURING CO INC

717 THEODORE, AL 36582 US

Telephone: 334-443-6110

Cage: 88633

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1.8%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 0.3%

OSHA PEL 100 PPM

Effects of Overexposure:INHALATION: MAY CAUSE HEADACHE, NAUSEA. SKIN:
PRIMARY IRRITATION. EYES: PRIMARY IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: REMOVE WITH SOAP &
WATER. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR 15
MINUTES. INGESTION: DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT
INDUCE VOMI TING. CONSULT MD OR POISON CONTROL IMMEDIATELY

Flash Point:DOES NOT FLASH
Lower Limits:0.8
Extinguishing Media:FOAM, ALCOHOL FOAM, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:RETURN MATERIAL TO CONTAINER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT
FREEZE. STORE LARGE QUANTITIES ONLY IN BUILDINGS DESIGNED TO CPLY
WITH OSHA 1910.106.
Other Precautions:DO NOT HANDLE UNTIL THE MANUFACTURER SAFETY
PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD.

Respiratory Protection:CHEMICAL-MECHANICAL RESPIRATOR IN RESTRICTED
VENTILATION
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PROTECTIVE OUTERWEAR
Supplemental Safety and Health
P.O. BOX 717, THEODORE, AL 36590.

Vapor Density:>AIR
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:61

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:FIRE
Hazardous Decomposition Products:OXIDIZING MATERIALS WILL BE GIVEN OFF.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.